News

Hello, come to consult our products !
  • Wall Plastic Flower Pot Mould

    There are many shapes of wall-mounted plastic flower pots, which can be divided into round, square, and oval. Plastic flowerpots can be watered many times, and it has better drainage. Many people now choose plastic flower pots for planting potted plants. There are many wall-mounted plastic flower...
    Read more
  • Logistics Fruit Basket Mold Customization

    The life of a mold refers to the period from the beginning of the trial to the scrapping of a mold. In the logistics fruit basket mold design stage, it is necessary to clarify the type of production batch or the total number of mold production parts that the mold is suitable for. Under normal cir...
    Read more
  • Children’s toy storage box mould processing and manufacturing

    Children’s toy storage box mold processing and manufacturing Aojie mold manufacturing for 15 years Aojie Mould’s advantages in the manufacturing of children’s toy storage boxes. Mould process: order acceptance → drawing review → mould design → material preparation → inspection →...
    Read more
  • Customization of car storage box mould

    The technical requirements are as follows:   1. Analyze the product molding process, the structure of the car storage box mold and the production process. Ensure that the life of the mold meets the requirements of the customers. 2. Design a complete mold structure and processing parts for the sto...
    Read more
  • What problems should be paid attention to in the process of mold design?

    1. The wall thickness should be as uniform as possible, and the draft angle should be large. 2. The transition part should be gradual and smooth. 3. Gate. The runner should be as wide as possible, thick and short, and the gate position should be set according to shorten the condensation process, ...
    Read more
  • What are the components of an injection mold?

    The mold is composed of a movable mold and a fixed mold. The movable mold is installed on the movable template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine. Gating system The gating system refers to the part of the runner...
    Read more
  • What are the principles for the selection of the gate position of the plastic mold

    The position of the gate has a great influence on the deformation of the injection molded part and has a direct impact on the quality of the injection molded part. Improper selection of the gate location will cause deformation of the injection molded part and many other defects. The choice of the...
    Read more
  • What are the requirements for plastic raw materials for hot runner injection molding?

    In principle, as long as the mold design is combined with the performance of plastic parts, almost all thermoplastics can be molded by hot runner injection molding, but currently the most widely used in hot runner injection molding are polyethylene, polypropylene, polystyrene, Polyacrylonitrile, ...
    Read more
  • What are the principles and characteristics of hot runner injection molding?

    Hot runner injection mold is also called runnerless injection mold. The difference between its pouring system and ordinary pouring system is that during the entire production process, the plastic in the pouring system is always in a molten state, and the pressure loss during injection is small, a...
    Read more
  • How to design complex molds for automobile bending pipes?

    1. Put the safety and convenience of production (processing/assembly/injection molding) first. ”Customer is God” is not only the purpose of the service industry, but also our purpose. For injection molding, matching is the first thing, and convenience is second. 2. Follow customer sta...
    Read more
  • Precautions for the production of chair molds

    Precautions for the production of chair molds

    1. The post-processing of the chair mold material is not required, because the plastic is soft and does not require special requirements such as hardness, and the heat treatment process may cause the mold to deform. 2. The cooling (water passage) in the chair mold is related to factors such as pr...
    Read more
  • What needs to be paid attention to in mold manufacturing

    What needs to be paid attention to in mold manufacturing

    As we are in contact with more and more mold production industries, do you know what the design steps of plastic molds are? What are the necessary skills that mold designers in the mold industry need to master? Although this is not something we are very concerned about, it needs to be understood....
    Read more